Glowing infinity cube with acrylic and LEDs

About this tutorial

Heliox builds a glowing infinity cube from scratch: six acrylic panels covered with one-way mirror film slot into 3D-printed edges that hide a white LED strip. The reflections repeat the light endlessly, and a remote controls the brightness. She also explains how to wire all twelve edges of a cube.

What you need

• 6 acrylic sheets, 20 × 20 cm, 3 mm
• One-way mirror film
• 3D-printed edges
• White LED strip with close cut points
• LED dimmer with remote and 12 V power supply
• Soldering iron, solder, flexible wire and wire strippers
• Utility knife, soapy water and superglue